Category: Cue Building

Psycho Red (stick 22)

An experiment in beautiful. The wood is spalted maple (stabilized). The thin black lines are from the wood. The rest is dye. First a deep coat of orange, then many layers of different reds. The last red was supposed to be wine, but it didn’t give the effect I wanted, so I added blue to […]

Read More

Caribbean Stick #20 after wet sand.

Caribbean Stick #20 after wet sand.

The ends still need polishing — that’ll happen with the stick assembled, so the joint is smooth to the touch. But the wood is about where it needs to be. Once it dries thoroughly I’ll be able to see where it’s at. Maybe apply more color. Maybe it’s ready for a higher grit sanding. Once […]

Read More

First blue on Carribean Stick

First blue on Carribean Stick

(updated images below…) This will take a few hours, but the first coat is on Caribbean Stick. Others get added on top to deepen and adjust the color. The waves are caused by the wood: curly spalted maple. It’s been stabilized, but the pores are still accepting dye. The darker areas are where the ripples […]

Read More

Color test for stick 20

Color test for stick 20

This is a piece of spalted and stabilized maple, the same wood as Stick 20: Caribbean Stick. The shine is 4 coats of CA glue, (not much), a quick wet sand up to 4000, and a topping of turner’s wax. The actual finish will be 2 coats of clear epoxy, 15 CA glue, and cue […]

Read More

Stick 20 at final size for coloring

Stick 20 at final size for coloring

Caribbean stick will be 6 shades of blue. I’ll do color tests and post them, and the stick owner will be able to give feedback on the colors… Til then, Carribean’s got her final shape (except for the final sand, which I’ll do after coloring). All spalted maple (stabilized, meaning, it’s been dried and most […]

Read More

Head and tail-

Head and tail-

-stock alignment The simplest, neatest trick to help you see two points is to not see them, but what they do. In this case, any misalignment will push the metal strip left or right, up or down. Just adjust the tailstock until the metal strip is straight.

Read More