Showing 163–171 of 216 resultsSorted by latest
Filters-
Protected: Stick 61 The First Kiss
Quick View$775.00Spalted/Stabilized Black Locust, Beech, Walnut BUTT with Black Cherry Burl/Spalted Maple JOINT PROTECTOR: $775
This is the first butt to become available on the “ready to ship” tab on CharacterCues.com for a long while. I could have named it A WALK THROUGH THE WOODS with all the different species involved.
I am enamored with the depth of the burl in the joint protector and with the knots in the black locust, the pale wood next to the butt sleeve. (Did you know Black Locust glows under a black light? Indeed. It causes a stir. And then of course, I can’t fail to mention the walnut’s chatoyance. It’s what they invented the word for. And the beech! Good night! Bolts of orange through bolts of black and brown and burnt bolts — !!!
Plus I added a quarter inch cap of maple on the end of the joint protector just for the squiggles. And the image the squiggles drew in my mind’s eye were of a frog looking off, cap askance, at a summer love arriving to the party to party.
Equipped with extension-accepting bumper.
Woods Used: Black locust (glows in black light), beech, walnut
Butt Length: 29″ including bumper
Full Core: hard maple
Pin: Radial, brass
Collar: .85″ Phenolic
Butt Widest: 1.24″
Weight: 13.3 – 15.3 oz (with weight bolt added before shipping. Be sure to ask because I have to epoxy the extension bumper before shipping, and after that, the weight isn’t changing.)
Shafts: (with decorative like-wood ring)
- Carbon Fiber — $450
- Purple Heart — $400
- BurcHowdy — $400 (low deflection torrefied wood)
- Maple — $350
- Birch — $350
- White Oak — $350
- Cherry — $350
- Walnut — $350
- Sassafras — $350
- Ash — $350
- Hickory — $350
- Black Locust — $350
Like Wood Joint Protector: $75 each
Like-Build Extensions:
3 -6″ — $250
7 – 12″ — $300
To add a shaft, joint protector or extension, please email me at Clayton@CharacterCues.com.
I’ll set this page up to reflect the cue as you want to purchase it, and password protect it for you until you do so.
-
Stick 58 Big Daddy’s Burl
Quick View$3,100.00SPALTED/STABILIZED WALNUT and BLACK CHERRY BURL butt with JOINT PROTECTOR: $2,075
Carbon Fiber Shaft: $450;
BurcHowdy: $400
9″ Extension: $250
Total: $3,100
Woods Used: Spalted/Stabilized walnut burl, black cherry burl
Earliest Completion Date: 1/24
Full Core: hickory
Currently available pins and collar diameters:
- 3/8-10 pin; .845″ collar
A word about shafts:
I build shafts out of ten species and carbon fiber. My advice is this: if you have a shaft you love to use, buy this butt to match that shaft. If you’ve heard of a famous shaft that you’d like to try, buy that shaft to match this butt.
However, if you’re into the art of it and want to have fun, try something new, and make your Character Cue fully badass, consider one of my ten species or carbon fiber with a like-wood decorative ring.
Read about the different species here: https://charactercues.com/comparing-10-shaft-wood-species/
Shafts: (with decorative like-wood ring)
- Carbon Fiber — $450
- Purple Heart — $400
- Maple — $350
- Birch — $350
- White Oak — $350
- Cherry — $350
- Walnut — $350
- Sassafras — $350
- Ash — $350
- Hickory — $350
- Black Locust — $350
Like Wood Joint Protector: $75 each
Like-Build Extensions:
3 -6″ — $250
7 – 12″ — $300
To add a shaft, joint protector or extension, please email me at Clayton@CharacterCues.com.
I’ll set this page up to reflect the cue as you want to purchase it, and password protect it for you until you do so.
-
Stick 57 Plain Green Rings
Quick ViewCurrent Bid: $580.00Auction is for 1 butt and 1 joint protector.
The handle is exquisite black cherry burl from right here in Hormtown PA. The forearm is spalted/stabilized tiger maple, featuring curl so wavy it’s like liquid rippling under the finish. Also look for the different colors of decay in the spalted wood, with areas of high contrast close to the handle. Collars are black phenolic.
Pin: 3/8-10
Collar Diameter: .84″
Butt Weight: 15.5 oz. (shafts are usually 3 – 4.5 oz., depending on material)
Butt Length: 30.5″ (32″ with joint protector)
Bumper accommodates 5/16-14 extension pin.
If desired, other items may be purchased after the auction and built to match within a few days:
Carbon Fiber shaft: $300
Wood Shaft: $200
Shaft Joint Protector: $75
2-6″ Extension: $200
7-12″ Extension: $250
-
Stick 52 : Hell Fuck Yeah (simply a must-have cue)
Quick ViewCurrent Bid: $800.00A Poem, everyone:
When I saw the finished stick I changed its name from Pursuit of Happiness to Hell Fuck Yeah.
Celebrate enthusiasm in its own right, enthusiastically!
But especially celebrate enthusiasm when you have a light saber in your hand, a nine, a tomahawk, a tank.
(hell fuck yeah)
If Hell Fuck Yeah had an engine it’d run on diesel and turn 700 horse.
If it was a woman it’d burn it’s bra.
If it was a dog it’d be a ninety pound pit and if it was a man,
It’d be you.
Character Cues.
Hell Fuck Yeah
Cue ships Tuesday the 9th. That’s when my shipping cardboard comes in.
This NO RESERVE auction is for:
- butt featuring black cherry burl, figured walnut, and oak (blue): $1,000
- 12-inch extension of black cherry burl and figured walnut: $250
- purple heart shaft with blue oak: $250
- birch shaft with black cherry burl: $250
- 3 black cherry burl joint protectors: $225
- total: $1,975
I will update with pics and details when I finish the shafts and joint protectors in the coming days. You choose the tips for your shafts — and rejoice! — for the ferrules are micarta. You almost can’t miss with micarta ferrules. 😉
-
Stick 48 Dr Schnazzy Pants
Quick ViewCurrent Bid: $570.00
Auction is for 1 butt, 1 shaft, 2 joint protectors. The second joint protector is unfinished at start of auction; I’m waiting on the screw. Will update with pics when finished in a couple days.
Woods Used: Black locust (which glows in black light), beech (spalted/stabilized pink rings); Shaft is black locust with a spalted/stabilized birch ring. The joint protectors are spalted/stabilized ash.
Core: Hickory
Pin: 3/8-10
Collar Diameter: .84″
Length: 58 7/8″
- Butt: 29 5/8″
- Shaft: 29 1/4″
Weight: 15.4 oz (drilled and tapped to add 1 additional ounce in the butt upon request)
- Butt: 11.6 oz
- Shaft: 3.8 oz
-
Stick 47 Green Burl Ray
Quick View$800.00Auction is for 1 butt, 1 shaft, and 2 joint protectors.
This cue was intended to be the ultimate raffle cue at the Bear Claw Cup. We decided to auction it here instead of do a raffle there — which makes me happy as I’ve been eager to auction a burl cue.
The cue is finished. I’ll update the images soon.
Woods Used: Black cherry burl, walnut (stabilized), beech (green rings)(stabilized)
Core: Hickory
Pin: 3/8-10
Collar Diameter: .84″
Tip Diameter: 11.7mm
Tip: Ultraskin Fire Medium (8 layer)
Length: 59 1/4″
- Butt: 29 5/8″
- Shaft: 29 5/8″
Weight: 17.7 – 18.7 oz (drilled and tapped to add 1 additional ounce in the butt upon request)
- Butt: 14.1 oz
- Shaft: 3.6 oz














